Wheelfreedom

About Wheelfreedom

Showroom

Location

Servicing

Health Professionals

Equipment Hire

Mobility Scooter Hire Service

Electric Wheelchair Hire Service

Manual Wheelchair Hire Service

Which Manual Wheelchair to Hire?

Motability

Try Before You Buy

Manual Wheelchairs

Guide to Manual Wheelchairs

Tilt in Space Wheelchairs

Introduction to Active Wheelchairs

Choosing an Active Wheelchair

Active Wheelchair Add-Ons

Handbikes 

Powerchairs

Guide to Powerchairs

Standing Wheelchairs

Powered Positioning

Hire or Buy

Permobil Wheelchairs

Dietz Powerchairs

Folding Electric Wheelchairs

Clinical Services

Clinical Assessment

Paediatric Seating and Mobility

Specialist Seating Solutions

Special Controls

24-Hour Posture Management

Exopulse Suit

CPD Training 

Mobility Scooters

Guide to Mobility Scooters

Travel Scooters

Folding Scooters

Pavement Scooters

Road Scooters

Off-Road Scooters

Approved Used Mobility Scooters

Furniture

Guide to Riser Recliner Chairs

Introduction to Adjustable Beds

Help and Advice

Battery Care

All About VAT

Insurance

Guide To Rollators

Active Wheelchairs

Rollators

Chairs

Beds

Stairlifts

National Wheelchair Hire

Master Template

Wheelchair add-ons service

Wheelchair add-ons delivery

A powerful, easy to fit and use push aid for wheelchairs, the Alber Via Go is compatible with most rigid or folding manual wheelchairs. Designed to provide practical power assistance, the Via Go offers relief from the stress and strain of pushing for caregivers with limited upper body strength or mobility. 

The Invacare Alber Via Go Powerpack is equipped with a single drive wheel, which is attached to the wheelchair axle. The system is equipped with a 24V DC brushless motor, a lithium-ion battery with a capacity of 280 Wh, and offers a range of up to 10 miles on a full charge, with a maximum speed support of 3.4 mph. It provides three levels of power assistance (low, medium, and high) that can be adjusted according to the user’s preference and needs.

The Via Go has an easy-to-use control unit that allows the user to adjust the power level, monitor the battery status, and activate the power assist.

You don´t have to remove the Via GO to fold up your wheelchair. The clever mounting device allows your wheelchair to be folded up as normal, even with the push aid still attached.

It has an easy-to-use control unit that allows the user to adjust the power level, monitor the battery status, and activate the power assist. It's also equipped with an automatic braking safety feature when the user releases, alleviating any worries about using the wheelchair when going down hills or ramps.

There's no doubt the Alber Via Go power assist system is a powerful and versatile option relieving a lot of the stress involved in pushing a manual wheelchair. What makes the Via Go really special is the way you can leave it attached to the wheelchair whilst folding it and the ease of which it you can detach it, if necessary. The 10 mile range is pretty healthy too. 

 is the only other powerpack on the market that can be folded up with the wheelchair. But this feature is really only an advantage if you're able to lift the wheelchair and the powerpack together. It might serve your purposes to detach the powerpack easily and then lift it separately into the car boot. We found the Via Go is a little easier to detach from the wheelchair than the R20 which could be critical for some. It's definitely worth putting both powerpacks through their paces to find your preferred solution.

Invacare Alber Via Go Powerpack

Invacare Powerpack
Wheelchair Powerpack
Manual Wheelchair Powerpack

Simple to use, easy to attach and detach, the Invacare Alber Via Go powered push and brake assist takes the strain out of pushing and offers a new level of practicality to our range.

Invacare Alber Via Go

Invacare Alber Via Go Powerpack

Pricing